We design and produce a wide variety of complete sets of automatic liquid washing production equipment, which can be designed and produced according to user needs, such as production scale, production process and other requirements, flexible configuration of various production lines, improve customer production efficiency, energy saving and consumption reduction!

Product characteristics

◆ All-directional frame wall scraping impeller without dead Angle, one-way mixing slurry and two-way mixing paddle can be selected, the use of frequency converter speed regulation, in the temperature bottom, high consistency to reduce the formation of bubbles. We can produce high quality products of different processes according to customers' requirements.

◆ High speed shearing homogenizer, 0-3000 RPM strong mixing of solid and liquid raw materials

Insoluble materials, saving energy consumption, greatly shortening the production cycle.

◆ Materials can be heated or cooled according to process requirements, and steam or electric heating can be selected according to user requirements.

◆ The pot body is composed of three layers of stainless steel plate welding, and the tank body is mirror-polished, which fully complies with GMP requirements.

◆ Material is SUS304 or SUS316L stainless steel.

◆ Optional with vacuum pump, vacuum vacuuming selection).

principle

After the material is mixed in the pot by heating and stirring, the center of the upper part of the emulsified pot is stirred, and the polytetrafluorovinyl scraper always caters to the body of the mixing pot, sweeping the wall sticky material, so that the scraped material constantly generates a new interface, and then after the blade is cut, compressed and folded, it is stirred and mixed down to the homogenizer below the pot body. The material is then cut through the strong shearing, impact, turbulence and other processes generated between the high-speed rotating cutting wheel and the fixed cutting sleeve, the material is cut in the shear joint, and is rapidly broken into 200m:92um when the particle is reduced, because the emulsion pot is in its empty state, the bubbles generated in the mixing process of the material are pumped away in time. The method of pumping its empty, so that the products produced in the stirring process no longer mixed with bubbles, so as to ensure the manufacture of shiny, delicate and good ductility of high-quality products.